Blog / Photography
Product Photography for Jewellery Brands
A kundan necklace that stops people at your counter can look like a cheap imitation on a phone screen. The gold turns orange, the stones go dark, the white background comes out grey, and the buyer scrolls on to a competitor whose pieces glow. Nothing is wrong with the jewellery. The photograph is letting it down.
This article is for the jeweller whose online catalogue is not doing the pieces justice. It covers how metal and stones behave under light, how to keep hundreds of pieces looking like one collection, when to use a model instead of a flat lay, where retouching becomes dishonest, and who owns the photos once they are shot.
Why jewellery is the hardest product to photograph
Jewellery is small, shiny and expensive, and each creates a problem. Small means the camera must get very close, and at that distance the area in sharp focus can be thinner than a ring band. Shiny means polished metal acts as a mirror, reflecting the room, the lights and the photographer's hands. Expensive means a buyer is far less forgiving of a vague image than they would be for a cotton kurta.
Stones add a second layer. A diamond looks lively because light enters, bounces around inside and comes back out as flashes. Under one large soft light a stone has nothing to flash, so it looks like glass. Coloured stones such as emerald, ruby and polki have the opposite problem: too much hard light and they wash out.
Phone cameras make this worse by guessing. Auto white balance sees a lot of yellow metal and tries to correct it, which makes 22 carat gold look pale. Auto exposure sees a white background and darkens the frame, so the piece ends up muddy and the background grey. The fixes are not costly, but they have to be deliberate.
Lighting metal and stones so both look right
The basic rule for metal is large, soft light. A light tent, a diffusion panel or even a white bedsheet between the lamp and the piece spreads the light across a wide area, so the metal reflects a smooth gradient instead of a hot spot.
Soft light alone makes stones dull. The trick is to add one or two small, hard lights, such as a bare LED or a torch, placed to the side so the facets catch them and sparkle. Black cards just outside the frame give the metal edges a dark reflection that defines the shape of a bangle against white.
Sharpness is the other half. Shooting close with a wide aperture leaves half a necklace blurred. The usual answer is a tripod and a small aperture, or focus stacking, where several frames focused at different points are combined into one sharp image. Ask any photographer you brief whether they focus stack.
- Diffuse the main light so metal shows a gradient, not a glare
- Add a small hard light for stones, positioned so the facets flash
- Use black cards outside the frame to define metal edges
- Shoot on a tripod with a small aperture, or focus stack
- Set white balance with a grey card, never on auto
Keeping a catalogue consistent
One beautiful photo does not sell a catalogue. A buyer comparing six pairs of jhumkas on your site needs them shot from the same angle, at the same size, on the same background. The moment one piece is on marble and the next on white, the collection looks assembled from different sellers.
Write a short shot list and keep it for every session. For each piece: a front view, a three-quarter view, a close-up of the stones or the work, the clasp or back, the hallmark stamp, and a scale shot. Fix the camera distance for each product type and tape marks on the table so the next session matches.
Colour needs a reference too. Place a grey card in the first frame of every session, and insist that retouching matches the gold tone across the whole batch. Check the finished files on a phone in daylight, because that is how most buyers will see them. Our product photography checklist covers general catalogue discipline; the extra steps for jewellery are the hallmark shot and the colour match.
Model, bust or flat lay: choosing for each piece
A flat lay on white is the workhorse. It is cheap, fast and what marketplaces require. But it fails at the question every buyer asks: how big is it? A pendant on a white table could be a coin or a thumbnail. A model shot answers scale instantly and shows how a necklace sits on the collarbone.
Model shoots cost more and bring their own problems. Skin tone shifts how gold reads, hair and clothing pull attention from the piece, and a heavy bridal set often photographs better on a plain cloth bust, which shows drape without competing with it. Earrings and nose pins almost always need an ear or a face for scale.
- Flat lay on white for every piece, as the marketplace baseline
- Cloth bust for heavy necklaces and bridal sets
- Model shots for scale, lifestyle and social media
- Short turning video for anything with stones or a high polish
Retouching that helps and retouching that costs you a return
Every jewellery photo is retouched. Dust, fingerprints, scratches on the backdrop and reflections of the camera all get cleaned, and nobody is misled. The problems start when retouching changes the piece itself.
Making stones larger or more saturated than they are, hiding a visible inclusion, turning a matte finish glossy, or warming the gold beyond what the buyer will see in the box: these produce a sale followed by a return, a dispute and a review that uses the word 'different'. In a category where trust is the whole pitch, that is expensive.
Put the rule in writing when you brief the photographer or retoucher: clean the environment, do not alter the product. Keep one untouched reference frame per piece. If a natural stone has an inclusion, photograph it and mention it. Buyers of natural stones expect it.
Usage rights, files and working with a photographer
Ask who owns the photos before the shoot, not when a marketplace asks for a licence. Under the usual arrangement the photographer holds the copyright and grants you a licence to use the images. The scope varies: some licences cover web and social only, some add print. Agree it in writing before the shoot, and ask for a wider licence if you expect to reuse the images across channels.
Ask for the files in two forms: large masters for print and future edits, and web-ready versions sized for your site and marketplaces. Name every file by SKU so your listings never mix up two similar rings.
Whether to hire a studio, a freelancer or shoot in-house depends on your catalogue size and how often it changes; our guide to studio, freelancer and DIY weighs the three. If you want a shoot planned around your catalogue, with lighting built for metal and stones, our photography and videography service is set up for that.
- Soft light for metal: Diffuse the main light so gold and silver show a smooth gradient, then add small hard lights so stones sparkle.
- Manual white balance: Auto settings make gold pale and white backgrounds grey; use a grey card in every session.
- One shot list: Shoot every piece from the same angles at the same distance so the catalogue reads as one collection.
- Scale sells: Add a bust, hand or model shot to flat lays so buyers can judge size, and a short turning video for stones.
- Clean, do not alter: Retouch dust and reflections but never change stone size, colour or finish; it leads straight to returns.
- Agree usage rights: Settle in writing which channels the licence covers and ask for SKU-named master and web files.
FAQs
Can I photograph jewellery well with a phone?
For social media and quick catalogue updates, yes, if you control the conditions. Use a tripod, a light tent or diffused window light, a plain background, and lock the exposure and white balance instead of leaving them on auto. Phones struggle with sharpness on very small pieces and with stone sparkle, so for a main catalogue of high-value pieces a camera with a macro lens and proper lighting still gives a clearly better result.
How many photos does each piece need?
A sensible minimum is a front view, a three-quarter view, a close-up of the work or stones, the back or clasp, the hallmark stamp, and one scale shot on a hand, bust or model. Marketplaces often set their own rules for background and image size, so check those before the shoot. Add a short video for pieces with stones or a high polish, since movement shows light in a way a still cannot.
Should the photos use a white or a coloured background?
White is the safe default: most marketplaces require it, it keeps the collection consistent, and it makes colour matching easier. Coloured or textured backgrounds suit campaign and social media images, where mood matters more than comparison. Many jewellers shoot both: a white set for the catalogue and listings, and a smaller styled set for the home page and Instagram. Avoid changing backgrounds within a single category.
How do I brief a photographer who has not shot jewellery before?
Ask to see close-ups of their past work on reflective products, and ask directly how they handle reflections, stone sparkle and sharpness across a small piece. Share your shot list, reference images, marketplace specifications and the usage rights you need before they quote. If the answers are vague, a photographer with jewellery experience will save you a reshoot. If you would like help planning a shoot built around your catalogue, get in touch.
Want help putting this into practice?
See our Photography & Videography, or book a free discussion and we'll review your business first.
Book a Free DiscussionPrefer WhatsApp? Message us and we will reply during working hours.